In this post I will tell you how udpxy is installed in the different devices to be able to use it.
Raspberry, Linux, Ubuntu, …
Cd /home/osmc/udpxy/udpxy. Sudo apt-get -y install build-essential. Sudo make install. Add permissions to run the start-up script; sudo apt-get -y install dvb-apps. Sudo chmod 777 run.sh. Next we have to Edit /etc/rc.local with nano to enable to run the program at startup; sudo nano /etc/rc.local. FreeBSD: 10-11, Linux: CentOS 6-7, Debian 8-9, Ubuntu 14.04-16.04 LTS. Hardware requirements: Any x86-64 hardware running Linux or FreeBSD. Minimum 4 Gb of RAM. Conact us if need to run on ARM or other architectures. Licensing: GigA+ is commercial software.
We will have to download the tool:
As tuxpiper says, make is already installed. What reveals this is the 'No targets specified and no makefile found' message, which is produced by make itself. Install-module.pl is an installation script that is part of Bugzilla. There isn't enough information in the question to be entirely certain that Bugzilla is what's being installed-perhaps there is other software that ships with a. Since Ubuntu 15.10 (resp. Debian 8 'jessie'), you have to use the following command to configure your service minidlna to run at startup: sudo systemctl enable minidlna.service And to disable it again from starting at boot time: sudo systemctl disable minidlna.service. Getting Started. Once you've downloaded and unpacked upstart, you will need to configure the source tree, build and install it. The main question here is deciding whether or not you want to take the plunge and replace sysvinit immediately, or whether you want to test first.
Wget http://sourceforge.net/projects/udpxy/files/latest/download?source=dlp
Once downloaded, you have to unzip it
tar -xzvf udpxy.1.0.23-0-prod.tar.gz
After decompressing it, we compiled and installed it
cd udpxy-10.0.23-0
Udpxy Ubuntu Download Mac
sudo make
Udpxy Ubuntu Download Free
sudo make install
Finally we execute it:
sudo udpxy -p 4022
Udpxy Ubuntu Download Windows 7
When it is executed as root, it will run as a daemon. And you’re done, you can create the list by pointing to the IP of the device in port 4022
Windows
You download the following tool http://borpas.info/download/UdpProxy.exe
When you execute it and a window will open, by default the port is 7781. Click on Start button and you’ll have it working. To avoid having the window open, you can run it as a service and so you can close the window and keep running.
Routers as Asus
If you have a router that have this tool by default. We must go to the corresponding configuration menu and specify the port where we want it to be working and Ready.